dmesg - gt 750m

Return To gt 750m System Information

efi: mem79: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
efi: mem82: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
efi: mem84: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: Acer Aspire V7-582PG/Dazzle_HW, BIOS V2.24 10/22/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 0080000000 mask 7FE0000000 write-back
  2 base 009B000000 mask 7FFF000000 uncachable
  3 base 009C000000 mask 7FFC000000 uncachable
  4 base 00FFC00000 mask 7FFFC00000 write-protect
  5 base 0100000000 mask 7F00000000 write-back
  6 base 0200000000 mask 7F80000000 write-back
  7 base 025F600000 mask 7FFFE00000 uncachable
  8 base 025F800000 mask 7FFF800000 uncachable
  9 base 0260000000 mask 7FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Base memory trampoline at [ffff88000007c000] 7c000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01a8e000, 0x01a8efff] PGTABLE
BRK [0x01a8f000, 0x01a8ffff] PGTABLE
BRK [0x01a90000, 0x01a90fff] PGTABLE
init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
 [mem 0x25f400000-0x25f5fffff] page 2M
BRK [0x01a91000, 0x01a91fff] PGTABLE
init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
 [mem 0x25c000000-0x25f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x25bffffff]
 [mem 0x200000000-0x23fffffff] page 1G
 [mem 0x240000000-0x25bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x94caffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x94bfffff] page 2M
 [mem 0x94c00000-0x94caffff] page 4k
init_memory_mapping: [mem 0x960b0000-0x9a6befff]
 [mem 0x960b0000-0x961fffff] page 4k
 [mem 0x96200000-0x9a5fffff] page 2M
 [mem 0x9a600000-0x9a6befff] page 4k
BRK [0x01a92000, 0x01a92fff] PGTABLE
BRK [0x01a93000, 0x01a93fff] PGTABLE
init_memory_mapping: [mem 0x9afff000-0x9affffff]
 [mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x3663e000-0x37316fff]
ACPI: RSDP 000000009affe014 00024 (v02 ACRSYS)
ACPI: XSDT 000000009affe210 000B4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
ACPI: FACP 000000009aff8000 0010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130725/tbfadt-202)
ACPI: DSDT 000000009afe6000 0E7C5 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 000000009afba000 00040
ACPI: UEFI 000000009affd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 000000009affb000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 000000009affa000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 000000009aff9000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 000000009aff7000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 000000009aff6000 0008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 000000009aff5000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 000000009afe4000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: LPIT 000000009afe3000 00094 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT 000000009afe1000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DBGP 000000009afe0000 00034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 000000009afdf000 00539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afde000 00AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afdb000 02EED (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afd6000 0287C (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: SSDT 000000009afd9000 008B6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BGRT 000000009afda000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
  NODE_DATA [mem 0x25f5f9000-0x25f5fcfff]
 [ffffea0000000000-ffffea00085fffff] PMD -> [ffff880256c00000-ffff88025ddfffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x25f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0006efff]
  node   0: [mem 0x00070000-0x00087fff]
  node   0: [mem 0x00100000-0x94caffff]
  node   0: [mem 0x960b0000-0x9a6befff]
  node   0: [mem 0x9afff000-0x9affffff]
  node   0: [mem 0x100000000-0x25f5fffff]
On node 0 totalpages: 2066502
  DMA zone: 56 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3974 pages, LIFO batch:0
  DMA32 zone: 8522 pages used for memmap
  DMA32 zone: 623296 pages, LIFO batch:31
  Normal zone: 19677 pages used for memmap
  Normal zone: 1439232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88025f200000 s85888 r8192 d20608 u262144
pcpu-alloc: s85888 r8192 d20608 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2038225
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7988424K/8266008K available (4718K kernel code, 679K rwdata, 1592K rodata, 972K init, 932K bss, 277584K reserved)
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
NR_IRQS:33024 nr_irqs:1016 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.552 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.10 BogoMIPS (lpj=9178208)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0x9a6bf000-0x9a8befff]
 [mem 0x9a6bf000-0x9a8befff] page 4k
init_memory_mapping: [mem 0x9a8bf000-0x9aabefff]
 [mem 0x9a8bf000-0x9aabefff] page 4k
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff8199e000 - ffffffff819a3000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (18356.41 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009ae7dc18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20121114)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20121114)
ACPI: SSDT 000000009ae7d618 005AA (v01  PmRef    ApIst 00003000 INTL 20121114)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20121114)
ACPI: SSDT 000000009ae7cd98 00119 (v01  PmRef    ApCst 00003000 INTL 20121114)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20121114)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: \_SB_.PCI0.WMID: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb3610000-0xb3613fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb3600000-0xb360ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb3618000-0xb361801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb3614000-0xb3617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb361c000-0xb361c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb361b000-0xb361b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb3619000-0xb36190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xb3500000-0xb3501fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:05:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:05:00.0: reg 0x10: [mem 0xb3405000-0xb3405fff]
pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:05:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [io  0x4000-0x40ff]
pci 0000:05:00.1: reg 0x18: [mem 0xb3404000-0xb3404fff 64bit]
pci 0000:05:00.1: reg 0x20: [mem 0xb3400000-0xb3403fff 64bit]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xb3400000-0xb34fffff]
pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 01]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0x1800-0x18fe] could not be reserved
system 00:03: [io  0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io  0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN1b71 SYN1b00 SYN0002 PNP0f13 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0x9fa21000-0x9fa21fff] has been reserved
system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:05:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x9ff00000-0x9fffffff pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0x9fb00000-0x9fcfffff]
pci 0000:00:1c.0:   bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:05:00.0: BAR 6: assigned [mem 0x9ff00000-0x9ff0ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.3:   bridge window [mem 0xb3400000-0xb34fffff]
pci 0000:00:1c.3:   bridge window [mem 0x9ff00000-0x9fffffff pref]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:1c.4: PCI bridge to [bus 01]
pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fcfffff]
pci_bus 0000:02: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xb3500000-0xb35fffff]
pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xb3400000-0xb34fffff]
pci_bus 0000:05: resource 2 [mem 0x9ff00000-0x9fffffff pref]
pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb2ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13156K (ffff88003663e000 - ffff880037317000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8f0c0000-0x930c0000] (64MB) mapped at [ffff88008f0c0000-ffff8800930bffff]
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1387840990.684:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15763
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: device [8086:9c10] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.2: device [8086:9c14] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
pcieport 0000:00:1c.3: device [8086:9c16] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.4: device [8086:9c18] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.4: irq 59 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 9c10 ss_vid 1025 ss_did 79b
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90021500000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-12-23 23:23:11 UTC (1387840991)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1416K (ffff88000149e000 - ffff880001600000)
Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[68]: starting version 204
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.12-trunk-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.12-trunk-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
rtsx_pci 0000:05:00.0: irq 61 for MSI/MSI-X
rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 61
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (52 C)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.1: can't disable ASPM; OS doesn't have ASPM control
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
SCSI subsystem initialized
libata version 3.00 loaded.
r8169 0000:05:00.1: irq 62 for MSI/MSI-X
r8169 0000:05:00.1 eth0: RTL8411 at 0xffffc90010092000, 08:9e:01:dd:34:a6, XID 1c800800 IRQ 62
r8169 0000:05:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb361c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.12-trunk-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 63 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b100 irq 63
ata2: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b180 irq 63
ata3: DUMMY
usb 1-3: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: TOSHIBA THNSNH256GMCT, HTCAN102, max UDMA/100
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: WDC WD10SPCX-22HWST0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPCX-22H 01.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA THNSNH25 HTCA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb5 sdb6
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
usb 1-3: New USB device found, idVendor=064e, idProduct=e330
usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-3: Product: HD WebCam
usb 1-3: Manufacturer: SuYin
usb 1-4: new full-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=8087, idProduct=07dc
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Starting manual resume from disk
PM: Hibernation image partition 8:21 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-6: new full-speed USB device number 4 using xhci_hcd
usb 1-6: New USB device found, idVendor=04f3, idProduct=0125
usb 1-6: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 1-6: Product: Touchscreen
usb 1-6: Manufacturer: ELAN
usb 1-6: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
systemd-udevd[355]: starting version 204
usb 3-1: new high-speed USB device number 2 using ehci-pci
ACPI: Requesting acpi_cpufreq
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized drm 1.1.0 20060810
ACPI: AC Adapter [ACAD] (on-line)
cfg80211: Calling CRDA to update world regulatory domain
ACPI: Battery Slot [BAT1] (battery present)
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:04:00.0: irq 65 for MSI/MSI-X
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
iwlwifi 0000:04:00.0: firmware: agent loaded iwlwifi-7260-7.ucode into memory
iwlwifi 0000:04:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm
tsc: Refined TSC clocksource calibration: 2294.688 MHz
wmi: Mapper loaded
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
i915 0000:00:02.0: irq 66 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
EFI Variables Facility v0.08 2004-May-17
input: PC Speaker as /devices/platform/pcspkr/input/input6
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-45-01 into memory
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU0 updated to revision 0x16, date = 2013-08-08
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-45-01 into memory
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU1 updated to revision 0x16, date = 2013-08-08
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-45-01 into memory
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU2 updated to revision 0x16, date = 2013-08-08
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
platform microcode: firmware: agent loaded intel-ucode/06-45-01 into memory
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU3 updated to revision 0x16, date = 2013-08-08
microcode: Microcode Update Driver: v2.00 , Peter Oruba
pstore: Registered efi as persistent store backend
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
media: Linux media interface: v0.10
hidraw: raw HID events driver (C) Jiri Kosina
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
Linux video capture interface: v2.00
Bluetooth: hci0: read Intel version: 370710018002030d16
Bluetooth: hci0: Intel device is already patched. patch num: 16
uvcvideo: Found UVC 1.00 device HD WebCam (064e:e330)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
alg: No test for crc32 (crc32-pclmul)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
fbcon: inteldrmfb (fb0) is primary device
acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input9
input: Acer BMA150 accelerometer as /devices/virtual/input/input10
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input11
hid-multitouch 0003:04F3:0125.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-6/input0
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00423/0x840300/0x126c00, board id: 2134, fw id: 1447239
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Switched to clocksource tsc
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130725/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff88025655b268), AE_NOT_FOUND (20130725/psparse-536)
ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input13
usb 1-6: USB disconnect, device number 4
acpi device:48: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 68 for MSI/MSI-X
hda_codec: invalid CONNECT_LIST verb 5[1]:0
hda_codec: invalid CONNECT_LIST verb 6[1]:0
hda_codec: invalid CONNECT_LIST verb 7[1]:0
input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input18
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Adding 9570300k swap on /dev/sdb5.  Priority:-1 extents:1 across:9570300k SS
EXT4-fs (sdb1): re-mounted. Opts: (null)
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
usb 1-6: new full-speed USB device number 5 using xhci_hcd
fuse init (API version 7.22)
loop: module loaded
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x249 offMax=0xbc0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:05:00.1: firmware: agent loaded rtl_nic/rtl8411-2.fw into memory
r8169 0000:05:00.1 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 1-6: unable to read config index 0 descriptor/start: -71
usb 1-6: can't read configurations, error -71
vboxpci: IOMMU not found (not registered)
usb 1-6: new full-speed USB device number 6 using xhci_hcd
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input20
bbswitch: version 0.7
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP05.PEGP
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
bbswitch: detected an Optimus _DSM function
pci 0000:01:00.0: enabling device (0006 -> 0007)
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ahci 0000:00:1f.2: port does not support device sleep
usb 1-6: unable to read config index 0 descriptor/start: -71
usb 1-6: can't read configurations, error -71
usb 1-6: new full-speed USB device number 7 using xhci_hcd
usb 1-6: unable to read config index 0 descriptor/start: -71
usb 1-6: can't read configurations, error -71
usb 1-6: new full-speed USB device number 8 using xhci_hcd
usb 1-6: unable to read config index 0 descriptor/start: -71
usb 1-6: can't read configurations, error -71
hub 1-0:1.0: unable to enumerate USB device on port 6
usb 1-6: new full-speed USB device number 9 using xhci_hcd
wlan0: authenticate with 00:24:d4:5f:74:34
wlan0: send auth to 00:24:d4:5f:74:34 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:24:d4:5f:74:34 (try 1/3)
wlan0: RX AssocResp from 00:24:d4:5f:74:34 (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
usb 1-6: unable to read config index 0 descriptor/start: -71
usb 1-6: can't read configurations, error -71
usb 1-6: new full-speed USB device number 10 using xhci_hcd
usb 1-6: New USB device found, idVendor=04f3, idProduct=0125
usb 1-6: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 1-6: Product: Touchscreen
usb 1-6: Manufacturer: ELAN
usb 1-6: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input21
hid-multitouch 0003:04F3:0125.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-6/input0
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: waking up from sleep
ata1: hard resetting link
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
wlan0: deauthenticating from 00:24:d4:5f:74:34 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: agent loaded rtl_nic/rtl8411-2.fw into memory
(NULL device *): firmware: agent loaded intel-ucode/06-45-01 into memory
(NULL device *): firmware: agent loaded iwlwifi-7260-7.ucode into memory
bbswitch: enabling discrete graphics
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 1164.425 msecs
PM: late suspend of devices complete after 0.175 msecs
pcieport 0000:00:1c.3: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 80.093 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Intel pstate controlling: cpu 1
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU1 updated to revision 0x16, date = 2013-08-08
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Intel pstate controlling: cpu 2
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU2 updated to revision 0x16, date = 2013-08-08
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Intel pstate controlling: cpu 3
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 159.972 msecs
PM: early resume of devices complete after 0.122 msecs
i915 0000:00:02.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: setting latency timer to 64
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
xhci_hcd 0000:00:14.0: irq 64 for MSI/MSI-X
mei_me 0000:00:16.0: irq 67 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -19
PM: Device 00:06 failed to resume: error -19
pcieport 0000:00:1c.3: System wakeup disabled by ACPI
usb 3-1: reset high-speed USB device number 2 using ehci-pci
usb 1-4: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802532cfa80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802532cfac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802532cfb00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025315c640
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88025315c680
btusb 1-4:1.0: no reset_resume for driver btusb?
btusb 1-4:1.1: no reset_resume for driver btusb?
usb 1-3: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880254ce9600
usb 1-6: reset full-speed USB device number 10 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880255741c40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880255741c80
usb 1-6: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/100
ahci 0000:00:1f.2: port does not support device sleep
sd 1:0:0:0: [sdb] Starting disk
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2785.931 msecs
PM: Finishing wakeup.
iwlwifi 0000:04:00.0: no hotplug settings from platform
rtsx_pci 0000:05:00.0: no hotplug settings from platform
r8169 0000:05:00.1: no hotplug settings from platform
pci 0000:01:00.0: no hotplug settings from platform
pci_bus 0000:02: Allocating resources
pci_bus 0000:04: Allocating resources
pcieport 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci_bus 0000:05: Allocating resources
pci_bus 0000:01: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xb3700000-0xb38fffff 64bit pref]
pcieport 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
iwlwifi 0000:04:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
rtsx_pci 0000:05:00.0: no hotplug settings from platform
r8169 0000:05:00.1: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pci 0000:01:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
pci_bus 0000:02: Allocating resources
pci_bus 0000:04: Allocating resources
pci_bus 0000:05: Allocating resources
pci_bus 0000:01: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
iwlwifi 0000:04:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
rtsx_pci 0000:05:00.0: no hotplug settings from platform
r8169 0000:05:00.1: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
pci 0000:01:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
Bluetooth: hci0: read Intel version: 370710018002030d00
------------[ cut here ]------------
WARNING: CPU: 2 PID: 11203 at /build/linux-H3rObT/linux-3.12.3/drivers/base/firmware_class.c:1105 _request_firmware+0x601/0x970()
Restarting tasks ... 
Modules linked in: bbswitch(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) parport_pc ppdev lp parport vboxdrv(O) rfcomm bnep cuse binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nls_utf8 nls_cp437 vfat fat loop fuse snd_hda_codec_realtek snd_hda_codec_hdmi arc4 joydev hid_multitouch acer_wmi sparse_keymap iTCO_wdt x86_pkg_temp_thermal iTCO_vendor_support coretemp kvm_intel kvm crc32_pclmul crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev hid media ghash_clmulni_intel btusb bluetooth aesni_intel efi_pstore aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper microcode psmouse serio_raw pcspkr evdev efivars i2c_i801 iwlmvm mac80211 wmi snd_hda_intel snd_hda_codec snd_hwdep iwlwifi snd_pcm i915 snd_page_alloc battery snd_seq cfg80211 snd_seq_device video snd_timer drm_kms_helper rtsx_pci_ms rfkill drm ac memstick lpc_ich i2c_algo_bit i2c_core snd button mei_me mei soundcore processor ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_common rtsx_pci_sdmmc mmc_core ahci libahci libata ehci_pci scsi_mod ehci_hcd r8169 thermal rtsx_pci mii thermal_sys mfd_core xhci_hcd usbcore usb_common
CPU: 2 PID: 11203 Comm: kworker/u17:0 Tainted: G           O 3.12-trunk-amd64 #1 Debian 3.12.3-1~exp1
Hardware name: Acer Aspire V7-582PG/Dazzle_HW, BIOS V2.24 10/22/2013
Workqueue: hci0 hci_power_on [bluetooth]
 0000000000000009 ffffffff8148a996 0000000000000000 ffffffff81059752
 ffff880254cbdd78 ffff8800366ded60 ffff88007c8b3bc0 ffff88021caf8a28
 ffff880254cbdd70 ffffffff813519d1 ffff88021caf8a28 ffff880200000000
Call Trace:
 [] ? dump_stack+0x41/0x51
 [] ? warn_slowpath_common+0x72/0x90
 [] ? _request_firmware+0x601/0x970
 [] ? snprintf+0x39/0x40
 [] ? request_firmware+0x2a/0x40
 [] ? btusb_setup_intel+0x1a3/0x780 [btusb]
 [] ? rpm_check_suspend_allowed+0x65/0xc0
 [] ? __pm_runtime_idle+0x57/0x80
 [] ? hci_dev_open+0x235/0x2d0 [bluetooth]
 [] ? hci_power_on+0x1a/0xc0 [bluetooth]
 [] ? process_one_work+0x16d/0x420
 [] ? worker_thread+0x116/0x3b0
 [] ? rescuer_thread+0x330/0x330
 [] ? kthread+0xaf/0xc0
 [] ? kthread_create_on_node+0x110/0x110
 [] ? ret_from_fork+0x7c/0xb0
 [] ? kthread_create_on_node+0x110/0x110
---[ end trace f3c92f6e098568af ]---
bluetooth hci0: firmware: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq will not be loaded
Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-11)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 11203 at /build/linux-H3rObT/linux-3.12.3/drivers/base/firmware_class.c:1105 _request_firmware+0x601/0x970()
Modules linked in: bbswitch(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) parport_pc ppdev lp parport vboxdrv(O) rfcomm bnep cuse binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nls_utf8 nls_cp437 vfat fat loop fuse snd_hda_codec_realtek snd_hda_codec_hdmi arc4 joydev hid_multitouch acer_wmi sparse_keymap iTCO_wdt x86_pkg_temp_thermal iTCO_vendor_support coretemp kvm_intel kvm crc32_pclmul crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev hid media ghash_clmulni_intel btusb bluetooth aesni_intel efi_pstore aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper microcode psmouse serio_raw pcspkr evdev efivars i2c_i801 iwlmvm mac80211 wmi snd_hda_intel snd_hda_codec snd_hwdep iwlwifi snd_pcm i915 snd_page_alloc battery snd_seq cfg80211 snd_seq_device video snd_timer drm_kms_helper rtsx_pci_ms rfkill drm ac memstick lpc_ich i2c_algo_bit i2c_core snd button mei_me mei soundcore processor ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_common rtsx_pci_sdmmc mmc_core ahci libahci libata ehci_pci scsi_mod ehci_hcd r8169 thermal rtsx_pci mii thermal_sys mfd_core xhci_hcd usbcore usb_common
CPU: 2 PID: 11203 Comm: kworker/u17:0 Tainted: G        W  O 3.12-trunk-amd64 #1 Debian 3.12.3-1~exp1
Hardware name: Acer Aspire V7-582PG/Dazzle_HW, BIOS V2.24 10/22/2013
Workqueue: hci0 hci_power_on [bluetooth]
 0000000000000009 ffffffff8148a996 0000000000000000 ffffffff81059752
 ffff880254cbdd78 ffff8800366ded60 ffff88007c8b3bc0 ffff88021caf8a28
 ffff880254cbdd70 ffffffff813519d1 ffff88021caf8a28 ffff880200000000
Call Trace:
 [] ? dump_stack+0x41/0x51
 [] ? warn_slowpath_common+0x72/0x90
 [] ? _request_firmware+0x601/0x970
 [] ? snprintf+0x39/0x40
 [] ? request_firmware+0x2a/0x40
 [] ? btusb_setup_intel+0x451/0x780 [btusb]
 [] ? __pm_runtime_idle+0x57/0x80
 [] ? hci_dev_open+0x235/0x2d0 [bluetooth]
 [] ? hci_power_on+0x1a/0xc0 [bluetooth]
 [] ? process_one_work+0x16d/0x420
 [] ? worker_thread+0x116/0x3b0
 [] ? rescuer_thread+0x330/0x330
 [] ? kthread+0xaf/0xc0
 [] ? kthread_create_on_node+0x110/0x110
 [] ? ret_from_fork+0x7c/0xb0
 [] ? kthread_create_on_node+0x110/0x110
---[ end trace f3c92f6e098568b0 ]---
bluetooth hci0: firmware: intel/ibt-hw-37.7.bseq will not be loaded
Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq
done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:05:00.1 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
mce: [Hardware Error]: Machine check events logged
r8169 0000:05:00.1 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags(DRM_MODE_FLAG_PVSYNC) (expected 0, found 4)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2836 at /build/linux-H3rObT/linux-3.12.3/drivers/gpu/drm/i915/intel_display.c:8810 check_crtc_state+0x63f/0xb30 [i915]()
pipe state doesn't match!
Modules linked in: bbswitch(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) parport_pc ppdev lp parport vboxdrv(O) rfcomm bnep cuse binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nls_utf8 nls_cp437 vfat fat loop fuse snd_hda_codec_realtek snd_hda_codec_hdmi arc4 joydev hid_multitouch acer_wmi sparse_keymap iTCO_wdt x86_pkg_temp_thermal iTCO_vendor_support coretemp kvm_intel kvm crc32_pclmul crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev hid media ghash_clmulni_intel btusb bluetooth aesni_intel efi_pstore aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper microcode psmouse serio_raw pcspkr evdev efivars i2c_i801 iwlmvm mac80211 wmi snd_hda_intel snd_hda_codec snd_hwdep iwlwifi snd_pcm i915 snd_page_alloc battery snd_seq cfg80211 snd_seq_device video snd_timer drm_kms_helper rtsx_pci_ms rfkill drm ac memstick lpc_ich i2c_algo_bit i2c_core snd button mei_me mei soundcore processor ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_common rtsx_pci_sdmmc mmc_core ahci libahci libata ehci_pci scsi_mod ehci_hcd r8169 thermal rtsx_pci mii thermal_sys mfd_core xhci_hcd usbcore usb_common
CPU: 0 PID: 2836 Comm: Xorg Tainted: G        W  O 3.12-trunk-amd64 #1 Debian 3.12.3-1~exp1
Hardware name: Acer Aspire V7-582PG/Dazzle_HW, BIOS V2.24 10/22/2013
 0000000000000009 ffffffff8148a996 ffff8802543cd928 ffffffff81059752
 ffff880036f796d0 ffff8802543cd978 0000000000000001 ffff8800364e4000
 ffff880036455000 ffffffff810597b7 ffffffffa03a492e 0000000000000018
Call Trace:
 [] ? dump_stack+0x41/0x51
 [] ? warn_slowpath_common+0x72/0x90
 [] ? warn_slowpath_fmt+0x47/0x50
 [] ? check_crtc_state+0x63f/0xb30 [i915]
 [] ? intel_modeset_check_state+0x2bc/0x750 [i915]
 [] ? intel_set_mode+0x1d/0x30 [i915]
 [] ? intel_crtc_set_config+0x7b5/0x9a0 [i915]
 [] ? snprintf+0x39/0x40
 [] ? drm_mode_set_config_internal+0x55/0xd0 [drm]
 [] ? drm_mode_setcrtc+0xec/0x620 [drm]
 [] ? i915_gem_execbuffer2+0x4a/0x260 [i915]
 [] ? drm_ioctl+0x46d/0x570 [drm]
 [] ? __switch_to_xtra+0x12d/0x160
 [] ? do_vfs_ioctl+0x2d4/0x4b0
 [] ? __schedule+0x2a6/0x720
 [] ? SyS_ioctl+0x80/0xa0
 [] ? system_call_fastpath+0x16/0x1b
---[ end trace f3c92f6e098568b1 ]---
bbswitch: enabling discrete graphics
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
[drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags(DRM_MODE_FLAG_PVSYNC) (expected 0, found 4)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2836 at /build/linux-H3rObT/linux-3.12.3/drivers/gpu/drm/i915/intel_display.c:8810 check_crtc_state+0x63f/0xb30 [i915]()
pipe state doesn't match!
Modules linked in: nvidia(PO) bbswitch(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) parport_pc ppdev lp parport vboxdrv(O) rfcomm bnep cuse binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nls_utf8 nls_cp437 vfat fat loop fuse snd_hda_codec_realtek snd_hda_codec_hdmi arc4 joydev hid_multitouch acer_wmi sparse_keymap iTCO_wdt x86_pkg_temp_thermal iTCO_vendor_support coretemp kvm_intel kvm crc32_pclmul crc32c_intel uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev hid media ghash_clmulni_intel btusb bluetooth aesni_intel efi_pstore aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper microcode psmouse serio_raw pcspkr evdev efivars i2c_i801 iwlmvm mac80211 wmi snd_hda_intel snd_hda_codec snd_hwdep iwlwifi snd_pcm i915 snd_page_alloc battery snd_seq cfg80211 snd_seq_device video snd_timer drm_kms_helper rtsx_pci_ms rfkill drm ac memstick lpc_ich i2c_algo_bit i2c_core snd button mei_me mei soundcore processor ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_common rtsx_pci_sdmmc mmc_core ahci libahci libata ehci_pci scsi_mod ehci_hcd r8169 thermal rtsx_pci mii thermal_sys mfd_core xhci_hcd usbcore usb_common
CPU: 2 PID: 2836 Comm: Xorg Tainted: P        W  O 3.12-trunk-amd64 #1 Debian 3.12.3-1~exp1
Hardware name: Acer Aspire V7-582PG/Dazzle_HW, BIOS V2.24 10/22/2013
 0000000000000009 ffffffff8148a996 ffff8802543cd928 ffffffff81059752
 ffff880036f796d0 ffff8802543cd978 0000000000000001 ffff8800364e4000
 ffff880036455000 ffffffff810597b7 ffffffffa03a492e 0000000000000018
Call Trace:
 [] ? dump_stack+0x41/0x51
 [] ? warn_slowpath_common+0x72/0x90
 [] ? warn_slowpath_fmt+0x47/0x50
 [] ? check_crtc_state+0x63f/0xb30 [i915]
 [] ? intel_modeset_check_state+0x2bc/0x750 [i915]
 [] ? intel_set_mode+0x1d/0x30 [i915]
 [] ? intel_crtc_set_config+0x7b5/0x9a0 [i915]
 [] ? snprintf+0x39/0x40
 [] ? drm_mode_set_config_internal+0x55/0xd0 [drm]
 [] ? drm_mode_setcrtc+0xec/0x620 [drm]
 [] ? i915_gem_execbuffer2+0x4a/0x260 [i915]
 [] ? drm_ioctl+0x46d/0x570 [drm]
 [] ? __switch_to_xtra+0x12d/0x160
 [] ? do_vfs_ioctl+0x2d4/0x4b0
 [] ? SyS_ioctl+0x80/0xa0
 [] ? SyS_writev+0x47/0xc0
 [] ? system_call_fastpath+0x16/0x1b
---[ end trace f3c92f6e098568b2 ]---
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
NVRM: RmInitAdapter failed! (0x24:0x38:1131)
NVRM: rm_init_adapter failed for device bearing minor number 0
NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
vgaarb: this pci device is not a vga device
nvidia 0000:01:00.0: irq 69 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device

Return To gt 750m System Information